| PART |
Description |
Maker |
| A2000B |
The scalable enterprise server
|
NEC
|
| TEF7018 |
Scalable advanced background receiver
|
NXP
|
| IRAUDAMP7D-15 |
25W-500W Scalable Output Power
|
International Rectifier
|
| PAC-P120W CBL-6X00-COM |
ETX CPU Module for Scalable and Time-efficient Customization
|
List of Unclassifed Man...
|
| 2988159 |
Fully scalable process diagrams for using one design on different devices and monitor sizes
|
PHOENIX CONTACT
|
| BCM569003 BCM5690 |
SPECIALTY TELECOM CIRCUIT, PBGA480
SCALABLE 12-PORT GIGABIT ETHERNET MULTILAYER SWITCH
|
Broadcom Corporation.
|
| PXA320 |
Cost-Effective, Scalable Performance up to 806 MHz for Power-Efficient, High-End Multimedia Handsets, Embedded Solutions, and Enterprise-Class Devices
|
Marvell Technology Group Ltd.
|
| 1551572-4 108-115008 |
Shield Finger Scalable Height From 1.24mm to 3.4mm
|
TE Connectivity Ltd
|
| MC9S12XDP512 MC9S12XA512 MC9S12XD256 MC9S12XDG128 |
HCS12X Microcontrollers
Signal Properties Summary
16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP144
16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP112
This specification describes the function of the clocks and reset generator (CRG).
Freescale’s Scalable Controller Area Network
Chapter 1Device Overview MC9S12XD-Family
MC9S12XDP512 Data Sheet Covers S12XD, S12XB & S12XA Families
|
Freescale Semiconductor...
Freescale Semiconductor, Inc
http://
FREESCALE SEMICONDUCTOR INC
Freescale Semiconductor, In...
|
| BCM5692 BCM5692A2KEB |
12-Port Layer 2 Gigabit Ethernet Switch with HiGig™ stacking
SCALABLE 12-PORT GIGABIT ETHERNET LAYER 2 SWITCH
|
Broadcom Corporation.
|
| P4KE250A P4KE24 P4KE47 P4KE220A P4KE47A P4KE170C P |
400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS 400瓦峰值功率瞬态电压抑制器
12-Bit, 165MSPS SpeedPlus(TM) DAC Scalable Current Outputs between 2mA to 20mA 28-SOIC -40 to 85
400 Watt peak power transient voltage suppressor. Reverse stand-off voltage VRWM = 138.00 V. Test current IT = 1 mA.
400 Watt peak power transient voltage suppressor. Reverse stand-off voltage VRWM = 171.00 V. Test current IT = 1 mA.
|
Microsemi
Bytes
|
